Pn16 Cast Iron Strainer with Flange End

PN16 Cast Iron Strainer With Flange End

The Y-type filter is Y-shaped. One end is for fluids such as water to pass through, and the other end is for settling waste and impurities. It is usually installed at the inlet end of a pressure reducing valve, pressure relief valve, fixed water level valve or other equipment. It The function of the filter is to remove impurities in the water to protect the normal operation of the valve and equipment. The water to be treated by the filter enters the body from the water inlet, and the impurities in the water are deposited on the stainless steel filter, resulting in a pressure difference. The pressure difference change between the inlet and outlet is monitored through the pressure difference switch. When the pressure difference reaches the set value, the electronic controller sends a signal to the hydraulic control valve and the drive motor, triggering the following actions: the motor drives the brush to rotate, cleans the filter element, and at the same time the control valve opens. To discharge sewage, the entire cleaning process only lasts for tens of seconds. When the cleaning is completed, the control valve is closed, the motor stops rotating, the system returns to its initial state, and the next filtration process begins. After the equipment is installed, technicians will conduct debugging and set the filtration time and cleaning conversion time. The water to be treated enters the body through the water inlet, and the filter begins to work normally.

the main size：

Hot Tags: pn16 cast iron strainer with flange end, China pn16 cast iron strainer with flange end manufacturers, suppliers, factory, 7120 8120 Series Pressure Air Valve, Manual Flange Cast Iron Pinch Valve, Hard Seal Cast Iron Butterfly Valve, Manual Delvalsanitary Butterfly Valve, Castingpfa Lined Butterfly Valve, Grade 125 Cast Iron Check Valve